Things to be aware of when installing a PV combiner box

Publish Time:2019-06-04 Author:admin Views:0

The protection level of the cabinet is IP65, which is suitable for outdoor installation. The installation position should meet the following requirements:

1. The position of the combiner box should be fully considered according to its size and weight (see the parameter section)

2. The installation environment temperature of the combiner box should be between -25 °C and +60 °C, and the relative humidity is between 0 and 95%.

3. The combiner box should be installed in a dry, well ventilated, dustproof place.

4. In and out line type and installation method: armored cable is driven in and out, and the outdoor PV module bracket is suspended from the rear pillar.

5. Avoid installing in direct sunlight, otherwise excessive temperature will reduce the system's power generation and may also affect the life of the combiner box.

6. For better heat dissipation and convenient daily maintenance, install enough space in the four directions of the combiner box.